Serinus® 30 User Manual 3.3
9. Parts List and Schematics
9.1 Serinus Accessories Kit
This kit contains assorted fittings, tubing and an orifice removal tool which are useful when working
on the instruments internal pneumatics. This is usually purchased with the instrument.
Table 17 – Serinus Accessories Kit – (PN: H010136)
Fitting Nut 1/4T KYNAR Plug
Fitting, Kynar, Union Tee 1/8 Barb - 400 Series
Fitting, Kynar, Union 1/8 Barb
Adaptor, 1/4" Fitting To 1/8" Barb
Adaptor,1/4" Tube To 1/8" Barb
Tool, Extraction Orifice and Filter
Tubing, 1/4" OD, 1/8" ID Black Norprene
Ecotech Tubing 1/4 X 1/8, Flexible Silicone W/ Kynar Lining
9.2 Maintenance Kit
This maintenance kit is required when performing annual maintenance on the instrument. Depending
on the environment the instrument is operating, this maintenance may need to be carried out more
often than yearly.
Table 18 – Serinus 30 Maintenance Kit – (PN: E020202)
Stainless Steel Sintered Filter
Spring Compression, 0.24 DIA
O-Ring (0.364 ID X 0.070 W)
Viton O-Ring (0.114 ID X 0.07 W)
O-Ring (5/32 ID X 1/16 W (BS007))
Viton O-Ring (1 11/16 ID X 3/32 W)
Viton O-Ring (1/4 ID X 1/16 W)
Viton O-Ring (13/16 ID X 1/16 W)
To Next Page
Loading...
