Ecotech Acoem Serinus 30 - Manual Revision History

Serinus® 30 User Manual 3.3
Page 18
Manual Revision History
Manual PN: M010027
Current revision: 3.3
Date released: 9 August 2021
Description: User Manual for the Serinus® 30 Carbon Monoxide Analyser
This manual is the full user manual for the Serinus® 30 Carbon Monoxide Analyser. This manual
contains all relevant information on theory, specifications, installation, operation, maintenance and
calibration. Any information that cannot be found within this manual can be obtained by contacting
Ecotech.
This manual uses cross reference links extensively throughout this manual. The hot keys below will
greatly reduce the amount of time scrolling between references:
 You can access the links by pressing the following:
> CTRL + LEFT MOUSE CLICK: Move to the link location
 You can switch between links by pressing the following:
> ALT + LEFT ARROW KEY: Returns you to previous Link
> ALT + RIGHT ARROW KEY: Swaps back
Table 2 – Manual Revision History
Edition
Date
Summary
1.0
October 2008
Initial release
1.1
February 2009
Updated communications
1.2
February 2009
New maintenance procedures
Updated instrument set-up
Small corrections
1.3
November 2009
Updates to menu system
Serinus downloader software
Internal pump option
Advanced parameter list
1.4
September 2010
CE conformity added
Updated parts list
Pressurised zero/span valve added
Updates to rack mount option
Updates to Serinus downloader
Update to 25 pin I/O
Update to network communication
Analog inputs
Network adapter menu