Safety Information
Read all the safety information in this section prior to using the equipment. To reduce the risk of
personal injury caused by potential hazards, follow all safety notices and warnings in this
documentation.
The following internationally recognised symbols are used on Ecotech equipment:
Table 1 – Internationally Recognised Symbols
Protective conductor terminal
Caution, risk of danger to user and/or equipment
Refer to any accompanying documents
Caution, risk of electric shock
These symbols will also be found throughout this manual to indicate relevant safety messages.
Note: Notes are used throughout this manual to indicate additional information regarding a
particular part or process.
If the equipment is used for purposes not specified by Ecotech, the protection provided by this
equipment may be impaired.
To Next Page
Loading...
