1.2.6 Communications
Analog Output
Three menu selectable current or voltage analog outputs.
Current output of 0 - 20 mA, 2 - 20 mA or 4 - 20 mA.
Voltage output of 0 - 5 V, with menu selectable zero offset of 0 V, 0.25 V or 0.5 V.
Voltage output of 0 - 10 V (configured using jumpers (JP3) on rear panel PCA).
Range: User scalable min and max range for analog output to suit application.
Analog Input
Three analog voltage inputs (0 - 5 VDC) CAT I rated.
Digital Output
RS232 port #1: Normal digital communication.
RS232 port #2: Multidrop port used for multiple instrument connections on a single RS232.
USB port connection on rear panel.
TCP/IP port (optional).
USB memory stick (front panel) for data logging, event logging, parameter and
configuration storage.
25 pin connector with discrete status and user control.
o Eight Digital Outputs, open collector max 400 mA each @ 12 VDC (max total output 2
A).
o Eight Digital Inputs, 0 - 5 VDC, CAT I rated.
1.2.7 Physical Dimensions
Case Dimensions
Rack length (front to rear): 622 mm (24.5”)
Total length (with latch release): 662 mm (26.1”)
Chassis width: 418 mm (16.5”)
Front panel width: 429 mm (16.9”)
Chassis height: 163 mm/Uses 4 RU (6.4”)
Front panel height: 185 mm (7.3”)
Weight: 20.2 kg
1.2.8 Certifications
U.S. EPA approval (RFCA-0509-174)
EN approval TÜV (0000040203-02)
To Next Page
Loading...
