Acclarix LX9 Series Diagnostic Ultrasound System User Manual
Transducer and Exam: There are drop-downs at the top of the screen for selecting the Transducer
and Exam Preset you want to edit. Each transducer has its own set of exam presets, and these two
drop-downs let you select which exam preset, on which transducer, you want to edit.
TI: Select the TIB, TIS or TIC to display on main screen.
Output Power: Set the default acoustic output power of the selected exam preset.
Image Modes: The next row of controls show tabs for each imaging mode. These let you select which
imaging mode you want to edit for the current exam preset.
The image mode is divided into two sections. Parameters that have one value for each preset are
shown on the left. Parameters that are associated with Image Types are shown on the right.
Image Type: Each imaging mode has a set of image types. For example in B-mode the types are
Detail, General, and Penetration. While imaging, the image type lets you quickly change the aesthetic
look of the image without changing settings like depth or invert status. The left side of the preset set-
up screen shows a tab for each image look. The parameters shown below those tabs let you
customize that image type for the current preset.
To Next Page
Loading...
Need help?
General
