C
HAPTER
26
| Interface Commands
Interface Configuration
– 977 –
show discard This command displays whether or not CDP and PVST packets are being
discarded.
COMMAND MODE
Privileged Exec
EXAMPLE
In this example, “Default” means that the packets are not discarded.
Console#show discard
Port CDP PVST
-------- ------- -------
Eth 1/ 1 Default Default
Eth 1/ 2 Default Default
Eth 1/ 3 Default Default
Eth 1/ 4 Default Default
Eth 1/ 5 Default Default
Eth 1/ 6 Default Default
.
.
.
show interfaces
brief
This command displays a summary of key information, including
operational status, native VLAN ID, default priority, speed/duplex mode,
and port type for all ports.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show interfaces brief
Interface Name Status PVID Pri Speed/Duplex Type Trunk
--------- ------------------ -------- ---- --- ------------- ------------ ---
Eth 1/ 1 Up 1 0 Auto-100full 100TX None
Eth 1/ 2 Down 1 0 Auto 100TX None
Eth 1/ 3 Down 1 0 Auto 100TX None
Eth 1/ 4 Down 1 0 Auto 100TX None
Eth 1/ 5 Down 1 0 Auto 100TX None
Eth 1/ 6 Down 1 0 Auto 100TX None
.
.
.
To Next Page
Loading...
Need help?
General
