C
HAPTER
13
| Security Measures
IPv4 Source Guard
– 402 –
DISPLAYING
INFORMATION FOR
DYNAMIC IPV4
S
OURCE GUARD
BINDINGS
Use the Security > IP Source Guard > Dynamic Binding page to display the
source-guard binding table for a selected interface.
CLI REFERENCES
◆ "show ip source-guard binding" on page 918
PARAMETERS
These parameters are displayed:
Query by
◆ Port – A port on this switch.
◆ VLAN – ID of a configured VLAN (Range: 1-4094)
◆ MAC Address – A valid unicast MAC address.
◆ IP Address – A valid unicast IP address, including classful types A, B
or C.
Dynamic Binding List
◆ VLAN – VLAN to which this entry is bound.
◆ MAC Address – Physical address associated with the entry.
◆ Interface – Port to which this entry is bound.
◆ IP Address – IP address corresponding to the client.
◆ Lease Time – The time for which this IP address is leased to the client.
WEB INTERFACE
To display the binding table for IP Source Guard:
1. Click Security, IP Source Guard, Dynamic Binding.
2. Mark the search criteria, and enter the required values.
3. Click Query
To Next Page
Loading...
