C
HAPTER
13
| Security Measures
Configuring HTTPS
– 340 –
◆ Private Key Source File Name
– Name of private key file stored on
the TFTP server.
◆ Private Password
– Password stored in the private key file. This
password is used to verify authorization for certificate use, and is
verified when downloading the certificate to the switch.
◆ Confirm Password
–
Re-type the string entered in the previous field
to ensure no errors were made. The switch will not download the
certificate if these two fields do not match.
WEB INTERFACE
To replace the default secure-site certificate:
1. Click Security, HTTPS.
2. Select Copy Certificate from the Step list.
3. Fill in the TFTP server, certificate and private key file name, and private
password.
4. Click Apply.
Figure 179: Downloading the Secure-Site Certificate
To Next Page
Loading...
