– 689 –
19 GENERAL COMMANDS
The general commands are used to control the command access mode,
configuration mode, and other basic functions.
prompt This command customizes the CLI prompt. Use the no form to restore the
default prompt.
SYNTAX
prompt string
no prompt
string - Any alphanumeric string to use for the CLI prompt.
(Maximum length: 255 characters)
DEFAULT SETTING
Console
COMMAND MODE
Global Configuration
Table 45: General Commands
Command Function Mode
prompt Customizes the CLI prompt GC
reload Restarts the system at a specified time, after a specified delay,
or at a periodic interval
GC
enable Activates privileged mode NE
quit Exits a CLI session NE, PE
show history Shows the command history buffer NE, PE
configure Activates global configuration mode PE
disable Returns to normal mode from privileged mode PE
reload Restarts the system immediately PE
show reload Displays the current reload settings, and the time at which next
scheduled reload will take place
PE
end Returns to Privileged Exec mode any config.
mode
exit Returns to the previous configuration mode, or exits the CLI any mode
help Shows how to use help any mode
? Shows options for command completion (context sensitive) any mode
To Next Page
Loading...
Need help?
General
