Edge-Core ECS3510-52T

C HAPTER 20 | System Management Commands
Line
– 732 –
parity This command defines the generation of a parity bit. Use the no form to
restore the default setting.
SYNTAX
parity {none | even | odd}
no parity
none - No parity
even - Even parity
odd - Odd parity
DEFAULT SETTING
No parity
COMMAND MODE
Line Configuration
COMMAND USAGE
Communication protocols provided by devices such as terminals and
modems often require a specific parity bit setting.
EXAMPLE
To specify no parity, enter this command:
Console(config-line)#parity none
Console(config-line)#
password This command specifies the password for a line. Use the no form to
remove the password.
SYNTAX
password {0 | 7} password
no password
{0 | 7} - 0 means plain password, 7 means encrypted password
password - Character string that specifies the line password.
(Maximum length: 32 characters plain text or encrypted, case
sensitive)
DEFAULT SETTING
No password is specified.
COMMAND MODE
Line Configuration