C
HAPTER
23
| Authentication Commands
PPPoE Intermediate Agent
– 862 –
EXAMPLE
Console(config)#interface ethernet 1/5
Console(config-if)#pppoe intermediate-agent trust
Console(config-if)#
pppoe
intermediate-agent
vendor-tag strip
This command enables the stripping of vendor tags from PPPoE Discovery
packets sent from a PPPoE server. Use the no form to disable this feature.
SYNTAX
[no] pppoe intermediate-agent vendor-tag strip
DEFAULT SETTING
Disabled
COMMAND MODE
Interface Configuration (Ethernet, Port Channel)
COMMAND USAGE
This command only applies to trusted interfaces. It is used to strip off
vendor-specific tags (which carry subscriber and line identification
information) in PPPoE Discovery packets received from an upstream PPPoE
server before forwarding them to a user.
EXAMPLE
Console(config)#interface ethernet 1/5
Console(config-if)#pppoe intermediate-agent vendor-tag strip
Console(config-if)#
clear pppoe
intermediate-agent
statistics
This command clears statistical counters for the PPPoE Intermediate Agent.
SYNTAX
clear pppoe intermediate-agent statistics interface [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
COMMAND MODE
Privileged Exec
To Next Page
Loading...
Need help?
General
