Chapter 4
| System Management Commands
System Status
– 116 –
Console#
show version This command displays hardware and software version information for the system.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show version
Unit 1
Serial Number : S123456
Hardware Version : R0A
EPLD Version : 0.00
Number of Ports : 28
Main Power Status : Up
Redundant Power Status : Not present
Role : Master
Loader Version : 0.0.2.2
Linux Kernel Version : 3.6.5
Boot ROM Version : 1.0.0.4
Operation Code Version : 1.0.1.0
Console#
Table 14: show version – display description
Parameter Description
Serial Number The serial number of the switch.
Hardware Version Hardware version of the main board.
EPLD Version Version number of Erasable Programmable Logic Device.
Number of Ports Number of built-in ports.
Main Power Status Displays the status of the internal power supply.
Redundant Power Status Displays the status of the redundant power supply.
(This switch does not support a redundant power supply.)
Role Shows that this switch is operating as Master or Slave.
Loader Version Version number of loader code.
Linux Kernel Version Version number of Linux kernel.
Boot ROM Version Version of Power-On Self-Test (POST) and boot code.
Operation Code Version Version number of runtime code.
To Next Page
Loading...
Need help?
General