Chapter 8
| Authentication Commands
AAA
– 237 –
Example
Console(config)#aaa group server radius tps
Console(config-sg-radius)#server 10.2.68.120
Console(config-sg-radius)#
accounting dot1x This command applies an accounting method for 802.1X service requests on an
interface. Use the no form to disable accounting on the interface.
Syntax
accounting dot1x {default | list-name}
no accounting dot1x
default - Specifies the default method list created with the aaa accounting
dot1x command.
list-name - Specifies a method list created with the aaa accounting dot1x
command.
Default Setting
None
Command Mode
Interface Configuration
Example
Console(config)#interface ethernet 1/2
Console(config-if)#accounting dot1x tps
Console(config-if)#
accounting exec This command applies an accounting method to local console, Telnet or SSH
connections. Use the no form to disable accounting on the line.
Syntax
accounting exec {default | list-name}
no accounting exec
default - Specifies the default method list created with the aaa accounting
exec command.
list-name - Specifies a method list created with the aaa accounting exec
command.
Default Setting
None
To Next Page
Loading...
Need help?
General