Chapter 8
| Authentication Commands
PPPoE Intermediate Agent
– 275 –
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This command only applies to trusted interfaces. It is used to strip off vendor-
specific tags (which carry subscriber and line identification information) in PPPoE
Discovery packets received from an upstream PPPoE server before forwarding
them to a user.
Example
Console(config)#interface ethernet 1/5
Console(config-if)#pppoe intermediate-agent vendor-tag strip
Console(config-if)#
clear pppoe
intermediate-agent
statistics
This command clears statistical counters for the PPPoE Intermediate Agent.
Syntax
clear pppoe intermediate-agent statistics interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-26)
Command Mode
Privileged Exec
Example
Console#clear pppoe intermediate-agent statistics interface
Console#
show pppoe
intermediate-agent
info
This command displays configuration settings for the PPPoE Intermediate Agent.
Syntax
show pppoe intermediate-agent info [interface [interface]]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-26)
To Next Page
Loading...
Need help?
General