Chapter 12
| Link Aggregation Commands
Trunk Status Display Commands
– 438 –
show port-channel
load-balance
This command shows the load-distribution method used on aggregated links.
Command Mode
Privileged Exec
Example
Console#show port-channel load-balance
Trunk Load Balance Mode: Destination IP address
Console#
Table 81: show lacp sysid - display description
Field Description
Channel group A link aggregation group configured on this switch.
System Priority
*
* The LACP system priority and system MAC address are concatenated to form the LAG system ID.
LACP system priority for this channel group.
System MAC
Address*
System MAC address.
To Next Page
Loading...
