Chapter 24
| Multicast Filtering Commands
IGMP Snooping
– 657 –
clear ip igmp
snooping groups
dynamic
This command clears multicast group information dynamically learned through
IGMP snooping.
Syntax
clear ip igmp snooping groups dynamic
Command Mode
Privileged Exec
Command Usage
This command only clears entries learned though IGMP snooping. Statically
configured multicast address are not cleared.
Example
Console#clear ip igmp snooping groups dynamic
Console#
clear ip igmp
snooping statistics
This command clears IGMP snooping statistics.
Syntax
clear ip igmp snooping statistics [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-26)
vlan vlan-id - VLAN identifier (Range: 1-4094)
Command Mode
Privileged Exec
Example
Console#clear ip igmp snooping statistics
Console#
show ip igmp
snooping
This command shows the IGMP snooping, proxy, and query configuration settings.
Syntax
show ip igmp snooping [vlan vlan-id]
vlan-id - VLAN ID (1-4094)
To Next Page
Loading...
Need help?
General