Chapter 13
| Power over Ethernet Commands
– 445 –
Related Commands
power inline (440)
show power
mainpower
Use this command to display the current power status for the switch.
Command Mode
Privileged Exec
Example
This example shows the maximum available PoE power and maximum allocated
PoE power for the ECS4120-28P.
Console#show power mainpower
Unit 1 PoE Status
PoE Maximum Available Power : 370.0 Watts
PoE Maximum Allocation Power : 370.0 Watts
System Operation Status : On
PoE Power Consumption : 7.3 Watts
Software Version : Version 1.6.0.7
Console#
Table 85: show power mainpower - display description
Field Description
PoE Maximum
Available Power
The available power budget for the switch
PoE Maximum
Allocation Power
The overall maximum power which is currently allocated by the power
mainpower maximum allocation command.
System Operation
Status
The current operating power status (displays on or off)
PoE Power
Consumption
The current power consumption on the switch in watts
Software Version The version of software running on the PoE controller subsystem in the switch.
To Next Page
Loading...
Need help?
General