Chapter 8
| Authentication Commands
PPPoE Intermediate Agent
– 276 –
Command Mode
Privileged Exec
Example
Console#show pppoe intermediate-agent info
PPPoE Intermediate Agent Global Status : Disabled
PPPoE Intermediate Agent Vendor ID : 3561
PPPoE Intermediate Agent Admin Access Node Identifier :
PPPoE Intermediate Agent Oper Access Node Identifier :
192.168.2.12
PPPoE Intermediate Agent Admin Generic Error Message :
PPPoE Intermediate Agent Oper Generic Error Message :
PPPoE Discover packet too large to process. Try reducing the number of tags
add
Console#show pppoe intermediate-agent info interface ethernet 1/1
Interface PPPoE IA Trusted Vendor-Tag Strip Admin Circuit-ID Admin Remote-ID
--------- -------- ------- ---------------- ------------ ----------------
Eth 1/1 No No No
Oper Circuit-ID Oper Remote-ID
---------------- -----------------
1/1:vid FC-0A-81-B7-C7-E1
Console#
show pppoe
intermediate-agent
statistics
This command displays statistics for the PPPoE Intermediate Agent.
Syntax
show pppoe intermediate-agent statistics interface [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-26)
Command Mode
Privileged Exec
Example
Console#show pppoe intermediate-agent statistics interface ethernet 1/1
Eth 1/1 statistics
-----------------------------------------------------------------------------
Received : All PADI PADO PADR PADS PADT
---------- ---------- ---------- ---------- ---------- ----------
3 0 0 0 0 3
Dropped : Response from untrusted Request towards untrusted Malformed
----------------------- ------------------------- ---------
0 0 0
Console#
To Next Page
Loading...
Need help?
General