Chapter 24
| Multicast Filtering Commands
MLD Snooping
– 685 –
Command Mode
Global Configuration
Example
Console(config)#ipv6 mld snooping vlan 1 static ff05:0:1:2:3:4:5:6 ethernet
1/6
Console(config)#
clear ipv6 mld
snooping groups
dynamic
This command clears multicast group information dynamically learned through
MLD snooping.
Syntax
clear ipv6 mld snooping groups dynamic
Command Mode
Privileged Exec
Command Usage
This command only clears entries learned though MLD snooping. Statically
configured multicast address are not cleared.
Example
Console#clear ipv6 mld snooping groups dynamic
Console#
clear ipv6 mld
snooping statistics
This command clears MLD snooping statistics.
Syntax
clear ipv6 mld snooping statistics [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
vlan vlan-id - VLAN identifier (Range: 1-4094)
Command Mode
Privileged Exec
To Next Page
Loading...
Need help?
General