Chapter 4
| System Management Commands
Event Logging
– 148 –
Example
Console(config)#logging trap level 4
Console(config)#
clear log This command clears messages from the log buffer.
Syntax
clear log [flash | ram]
flash - Event history stored in flash memory (i.e., permanent memory).
ram - Event history stored in temporary RAM (i.e., memory flushed on
power reset).
Default Setting
Flash and RAM
Command Mode
Privileged Exec
Example
Console#clear log
Console#
Related Commands
show log (148)
show log This command displays the log messages stored in local memory.
Syntax
show log {flash | ram}
flash - Event history stored in flash memory (i.e., permanent memory).
ram - Event history stored in temporary RAM (i.e., memory flushed on
power reset).
Default Setting
None
Command Mode
Privileged Exec
Command Usage
â—† All log messages are retained in RAM and Flash after a warm restart (i.e., power
is reset through the command interface).
To Next Page
Loading...
Need help?
General