M588-08-880 Issue D
Page 94 © Edwards Limited 2017. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Check valve assy
7.3 Installation
7.3.1 Unpack and inspect
Remove all the packaging materials and inspect the check valve for signs of damage. If the check valve is damaged,
notify your supplier and the carrier in writing within three days; state the Item number of the check valve together
with your order number and your supplier's invoice number. Do not use the check valve if it is damaged.
Check that your package contains the items listed in Ta b l e 5 9 and 60. If any of these items are missing, notify
your supplier in writing within three days.
If the check valve is not to be used immediately, store as described in Section 7.
Figure 69 - Vertical silencer
To Next Page
Loading...
