Edwards GXS - Stainless Steel ISO - ANSI Inlet Spools; M58808134 Stainless Steel Inlet Spool ISO63 - ANSI 4 Inch

M588-08-880 Issue D
Page 14 © Edwards Limited 2017. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Inlet spool
2.2.3 Stainless steel ISO - ANSI inlet spools
Figure 12 - M58808134 stainless steel inlet spool ISO63 - ANSI 4 inch
Table 11 - M58808134 stainless steel inlet spool ISO63 - ANSI 4 inch check list
Item Qty Description Check
1 1 Gasket 4 inch ANSI x 2.5 thick 
2 1 ISO63 - ANSI 4 inch inlet spool - stainless steel 
3 1 1 inch BSP blanking plug 
4 1 O-ring 35.15 I/D x 3.0 
5 4 M8 x 40 hex head screw - stainless steel 
6 4 M8 washer normal - stainless steel 
73½ inch BSP taper plug 
8 4 M8 washer single coil spring - stainless steel 