© Edwards Limited 2017. All rights reserved. Page 29
Edwards and the Edwards logo are trademarks of Edwards Limited.
Inlet spool
M588-08-880 Issue D
2.8 Storage and disposal
2.8.1 Storage
If the inlet spool will not be used immediately:
1. Clean the inlet spool assembly.
2. Protect the sealing faces and place the inlet spool assembly in a sealed polythene bag.
3. Store in a cool dry place.
2.8.2 Disposal
Dispose of the inlet spool assembly in accordance with all local and national safety and environmental requirements.
To Next Page
Loading...
