Edwards GXS - Stainless Steel Inlet Filter

M588-08-880 Issue D
Page 50 © Edwards Limited 2017. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Inlet filters
4.2.2 Stainless steel inlet filter
Figure 37 - M58808137 stainless steel inlet filter ANSI 4 inch - ISO100
Table 46 - M58808137 stainless steel inlet filter ANSI 4 inch - ISO100 check list
Item Qty Description Check
1 1 ANSI 4 inch - ISO100 inlet filter - stainless steel 
2 1 ISO100 trapped O-ring (Fluoroelastomer) 
3 8 M8 full nut - stainless steel 
4 16 M8 washer normal - stainless steel 
5 8 M8 x 60 hex head screw - stainless steel 