Edwards GXS - M59808135 Stainless Steel Inlet Spool ISO100 - ISO100

M588-08-880 Issue D
Page 20 © Edwards Limited 2017. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Inlet spool
Figure 18 - M59808135 stainless steel inlet spool ISO100 - ISO100
Table 17 - M59808135 stainless steel inlet spool ISO100 - ISO100 check list
Item Qty Description Check
1 1 ISO100 trapped O-ring seal (Viton) 
2 1 ISO100 - ISO100 inlet spool - stainless steel 
3 1 1 inch BSP blanking plug 
4 1 O-ring 35.15 I/D x 3.0 
5 4 M8 x 40 hex head screw - stainless steel 
6 4 M8 washer normal - stainless steel 
7 3 ½ inch BSPT hollow taper plug 
8 8 M8 washer single coil spring - stainless steel 