Edwards GXS - Stainless Steel Inlet Spool ISO160 - ISO160

M588-08-880 Issue D
Page 22 © Edwards Limited 2017. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Inlet spool
Figure 20 - Stainless steel inlet spool ISO160 - ISO160
Table 19 - Stainless steel inlet spool ISO160 - ISO160 check list
Item Qty Description Check
1 1 ISO160 trapped O-ring (Fluoroelastomer) 
2 1 ISO160 - ISO160 inlet spool - stainless steel 
34½ inch BSP taper plug 
4 8 M10 x 45 hex head screw - stainless steel 
5 8 M10 washer normal - stainless steel 
6 8 M10 washer single coil spring - stainless steel 