M588-08-880 Issue D
Page 106 © Edwards Limited 2017. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Digital pressure measurements
8.4 Storage and disposal
8.4.1 Storage
If the pressure transducer assembly will not be used immediately:
1. Drain and clean the pressure transducer assembly.
2. Protect the thread and micro Din connector and place the pressure transducer assembly in a sealed polythene
bag.
3. Store in a cool dry place.
8.4.2 Disposal
Dispose of the pressure transducer assembly in accordance with all local and national safety and environmental
requirements.
To Next Page
Loading...
