Edwards GXS - M58828003 Carbon Steel Inlet Spool ISO100 - ISO160

© Edwards Limited 2017. All rights reserved. Page 11
Edwards and the Edwards logo are trademarks of Edwards Limited.
Inlet spool
M588-08-880 Issue D
Figure 9 - M58828003 carbon steel inlet spool ISO100 - ISO160
Table 8 - M58828003 carbon steel inlet spool ISO100 - ISO160 check list
Item Qty Description Check
1 1 ISO160 trapped O-ring (Fluoroelastomer) 
2 1 ISO100 - ISO160 inlet spool - carbon steel 
34½ inch BSP taper plug 
4 8 M8 x 40 hex head screw - stainless steel 
5 8 M8 washer normal - stainless steel 
6 8 M8 washer single coil - stainless steel 