Safety and compliance
Denion of Warnings and Cauons
Important safety informaon is highlighted as WARNING and CAUTION instrucons; these
instrucons must be obeyed.
The use of WARNINGs and CAUTIONs is
dened below.
WARNING:
Warnings are given where failure to observe the instrucon could result in injury or death
to people. The actual symbol shown varies according to the hazard.
CAUTION:
Cauons are given where failure to observe the instrucon could result in damage to the
equipment, associated equipment or process.
Safety symbols
The safety symbols on the products denote areas where care and aenon is required.
The following safety symbols may be used on the nEXT85 and throughout the product
documentaon.
Warning/Cauon
- An appropriate safety instrucon should be followed or
cauon to a potenal hazard exists.
Warning Dangerous Voltage - Indicates hazards arising from dangerous
voltages.
Warning Hot Surfaces - Indicates that the marked item may be hot and should
not be touched without taking precauons.
Protecve conductor (ground) - To idenfy any terminal intended for
connecon to an external conductor for protecon against electric shock in
case of a fault, or the terminal of a protecve earth (ground) electrode.
Warning Risk of Explosion - Indicates the potenal risk of explosion.
Warning Use protecve equipment - Indicates that appropriate protecve
equipment must be used.
B8G0-00-880A - Safety and compliance
Page 11