This product has been manufactured under a quality management system certified to ISO 9001:2008
Declaration of Conformity
We, Edwards,
Innovation Drive,
Burgess Hill,
West Sussex,
RH15 9TW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised
to assemble the technical file, that the product(s)*
nEXT85
* The material numbers cover a family of pumps where the following component features may vary according to
the variant; ‘X’ denotes combinations of variants of the geometry of pump inlet ports, geometry or position of
exhaust port and the material and geometry of the pump casing.
to which this declaration relates is in conformity with the following standard(s) or other
normative document(s)
EN1012-2:1996+A1:2009 Compressors and Vacuum Pumps. Safety Requirements.
Vacuum Pumps
EN61010-1:2010 Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use. General Requirements
EN61326-1:2013 Electrical equipment for measurement, control and laboratory
(Class B Emissions, Use. EMC requirements. General requirements.
Industrial Immunity)
CAN/CSA-C22.2 Safety requirements for electrical equipment for measurement,
No.61010-1-12 Control and laboratory use – Part 1: General requirements
UL61010-1, 3
rd
Edition Safety requirements for electrical equipment for measurement,
Control and laboratory use – Part 1: General requirements
and fulfils all the relevant provisions of
2006/42/EC Machinery Directive
2014/35/EU Low Voltage Directive
2014/30/EU Electromagnetic Compatibility (EMC) Directive
2011/65/EU Restriction of Certain Hazardous Substances (RoHS) Directive
Note: This declaration covers all product serial numbers from the date this Declaration was
signed onwards.
24.10.2016, Burgess Hill
Mr Peter Meares
Senior Technical Support Manager, General Vacuum
Date and Place
P200-10-100 - Issue B
To Next Page
Loading...
Need help?
General
