Disposal
WARNING:
In the unlikely event of a failure of the pump rotor, there may be some dust created from
the rotary components inside the pump touching each other. In this event use appropriate
personal protecve equipment when handling and disposing of the pump and ensure that
all pump inlets and outlets are capped o before disposal.
Take appropriate acon to avoid inhalaon of any parculates which may be present in
the pump. Do not incinerate the pump.
A HS2 form must be completed if returning the pump to Edwards.
Dispose of the pump and any components and accessories safely and in accordance with all
local and naonal safety and environmental requirements.
Parcular care must be taken with any components that have been contaminated with
dangerous process substances.
Take appropriate acon to avoid inhalaon of any parcles that may be present in the pump.
Do not incinerate the pump. The pump contains phenolic and uorosilicone materials that can
decompose to very dangerous substances when heated to high temperatures.
B8G0-00-880A - Disposal
Page 64