Edwards nEXT85 User Manual

nST PC program
The nST PC program is PC-based soware that can be used with the nEXT85 pump either via
the serial interface or via the USB service port.
It can be used to control, monitor,
congure and data log the nEXT85 pump, and also to view
service status, reset service intervals and upgrade the soware embedded in the motor
controller.
This soware is available for download from the Edwards upgrades website:
www.upgrades.edwardsvacuum.com
Currently, nST soware requires a free license in order to be used. To obtain a free license
please follow the onscreen instrucons, ll out the user data form and then send the
automacally generated email to Edwards.
Auxiliary connector
Enables the use of accessories that do not come prewired with a mang plug. Cable length is
1.5 m.
Table 32
Auxiliary connector
Item Item number
nEXT85 auxiliary connector B8G200839
Auxiliary extension cable
The cable extends the distance of the accessory to the pump and
benets from a right angled
plug to accommodate
installaon where space is limited. Cable length is 0.2 m.
Table 33
Auxiliary extension cable
Item Item number
nEXT85 auxiliary extension cable B8G200836
B8G0-00-880A - Accessories for the nEXT85
Page 82

Edwards nEXT85 Specifications

General

Brand	Edwards
Model	nEXT85
Category	Water Pump
Language	English