Eldes ESIM264 - Page 121

MANUAL ELDES ESIM264 V2.0 121
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → ARC SET → COMMUNICATION →
CONNECTION TYPE → GPRS / VOICE CALLS / RS485 / CSD / N/A
EKB3
Enter parameter 48 & connection type value:
[480#] - GPRS Network
[481#] - Voice Calls
[482#] - RS485
[483#] - CSD
[484#] - N/A
Primary communication type for data transmission from the alarm system to monitoring sta-
tion. Available types: GPRS Network, Voice Calls (GSM audio channel), RS485, CSD. By default
the primary communication type is GPRS network.
Set Primary
Communication Type
SMS
N/A
EKB2
Menu path:
OK → CONFIGURATION → ARC SET → CONNECTION TYPE1 →
GPRS / VOICE CALLS / RS485 / CSD / N/A
OK → CONFIGURATION → ARC SET → CONNECTION TYPE2 →
GPRS / VOICE CALLS / RS485 / CSD / N/A
OK → CONFIGURATION → ARC SET → CONNECTION TYPE3 →
GPRS / VOICE CALLS / RS485 / CSD / N/A
EKB3
Enter parameter 83, backup communication entry number & communi-
cation type value:
[83xx0#] - GPRS Network
[83xx1#] - Voice Calls
[83xx2#] - RS485
[83xx3#] - CSD
[83xx4#] - N/A
Value: xx - backup communication entry number, range - [01... 03]
This command sets the sequence order of backup communication types in case of primary
communication failure. There can be up to 3 backup communications set in any sequence order.
Set Backup
Communication
Type (-s)