Emerson Fisher FLOBOSS 407 User Manual

FloBoss 407 Instruction Manual
Rev 5/00 5-11
5.4.4 Flow Comp
Press the
FLOW COMP
key to display the gas composition parameters for the first meter
run. The ↑ and ↓ keys scroll through the parameters for the first meter run. To move to
the second meter run, press
ALT
and
NEXT SET
. The LCD starts displaying the
parameters for the second meter run.
5.4.5 Meter Config
Press the
METER CONFIG
key to display information concerning the selected meter run.
The LCD displays the pipe diameter, orifice diameter, latitude, elevation, calculation
method, tap type, orifice material, DP low flow cutoff for the meter run.
5.4.6 User List Keys
There are three
USER LIST
keys:
USER LIST1
,
USER LIST2
, and
USER LIST3
. The
USER
LIST
keys display lists of parameters configured using the ROCLINK Configuration
Software. Figure 5-5 shows the format of the User List display.
L
LL
LI
II
IS
SS
ST
TT
T#
##
#1
11
11
11
1O
OO
OF
FF
F1
11
10
00
0
D
DD
DE
EE
ES
SS
SC
CC
CR
RR
RI
II
IP
PP
PT
TT
TI
II
IO
OO
ON
NN
NV
VV
VA
AA
AL
LL
LU
UU
UE
EE
E
Figure 5-5. User List Display
5.4.7 Alarms
The
ALARMS
key causes the FloBoss 407 to scroll through the alarm log. The display
shows the date of the logged alarm as month, day (1, 12) and the time as hour: minute
(12:06).
The SET/CLR field indicates whether the alarm is set or cleared. The TYPE field
displays a 4-character alarm type description such as (LOLO, HIHI). The TAG and
VALUE fields identify the tag of the point alarmed and the value at the time of alarm.
Figure 5-6 shows the alarm summary display.

Emerson Fisher FLOBOSS 407 Specifications

General

Brand	Emerson
Model	Fisher FLOBOSS 407
Category	Control Unit
Language	English