Device Functions Proline Promass 83 FOUNDATION Fieldbus 3 Transducer Block
Endress+Hauser 117
System Unit -
Ref. Density
AUTO - OOS Use this parameter to select the unit for the reference density.
The unit you select here is also valid for:
• Simulation
• Fixed reference density (for calculation of corrected volume flow)
Options:
Metric → kg/Nm
3
; kg/Nl
US → g/Scc; kg/Sm
3
; lb/Scf
Factory setting:
kg/Nl
! Note!
The unit selected here has no influence on the transmitted process variable
to the Analog Input function block.
System Value
Temperature
read only The currently measured temperature appears on the display.
Display:
Max. 4-digit fixed-point number, including unit and sign
(e.g. -23.4 °C; 160.0 °F; 295.4 K; etc.)
System Unit
Temperature
AUTO - OOS Use this parameter to select the unit for the temperature.
The unit you select here is valid for:
• Simulation
• Reference temperature (for corrected volume measurement with
measured reference density)
Options:
°C (Celsius)
K (Kelvin)
°F (Fahrenheit)
R (Rankine)
Factory setting:
°C
! Note!
The unit selected here has no influence on the transmitted process variable
to the Analog Input function block.
System Unit -
Length
AUTO - OOS Use this parameter to select the unit for the temperature.
The unit you select here is also valid for:
• Simulation
• Nominal diameter of the sensor
Options:
MILLIMETER
INCH
Factory setting:
MILLIMETER
! Note!
The unit selected here has no influence on the transmitted process variable
to the Analog Input function block.
"Flow" Transducer Block / base index 1400:
Parameter
Write access
with operating
mode
(MODE_BLK)
Description
To Next Page
Loading...
