Operation of the satellite system
RAXSAT150
109
RAXSAT150
Operating the cable reel and the SAT cable reel (RAXSAT150)
The cable reel functions are controlled via the cable reel menu. By default the automatic mode is active for both cable reels. The display “A“ on
the right control panel lights up.
In automatic mode both cable reels are automatically controlled by the system. The winding and unwinding of both cable reels is synchronized
with the direction of movement and the speed of the crawler.
In automatic mode the winding speed of the crawler is synchronized with the two cable reels. In addition, the automatic tensile force for both
reels can be increased manually to optimize the synchronization. In manual mode, the tensile force and the winding speed of the twoe cable reels
can be controlled.
Switching between automatic mode and manual mode of the cable reels
NOTE!
When switching from automatic to manual mode, both cable reels are in manual mode. by default the manual mode of the SAT
cable reel is activated.(
).
• To switch between automatic mode and manual mode, press .
The respective symbol lights up.
To Next Page
Loading...
Need help?
General
