Operation of the satellite system
Operating the system with the remote control
117
Operating the system with the remote control
Certain functions can be controlled with the remote control to facilitate the operation of the ROVVER X-system and to increase your operation
range.
For information how to control the system with the remote control please see the ROVVER X user manual.
Disabling of the DCX5000 operating functions
After activating the remote control the operating functions of the DCX5000 desktop control unit are switched off and simultaneously the following
message is displayed on the monitor:
This dialog will be displayed on the touch-screen monitor until the system will be controlled through the control panel, again.
• Press OK to disable the remote control and to reactivate the system control via the DCX5000 desktop control unit.
To Next Page
Loading...
Need help?
General
