Envirosight DCX5000 User Manual

Operation of the satellite system
RAXSAT150
111
Adjusting reel's the tensile force in the auto mode
• Increase or reduce the tensile force for unwinding and rewinding the cable by moving the encoder wheel forwards or backwards.
• For selecting the reel, for which you would like to preset the tensile force, press
in the cable reel menu.
An activated button means that the SAT cable reel is active.
A disabled button means that the cable reel is active.
Adjusting winding speed and tensile force in the manual mode
• For adjusting the winding speed and winding direction of the cable in the manual mode, move the encoder wheel forwards
or backwards.
• For adjusting the tensile force for unwinding and rewinding the cable in the manual mode, move the encoder wheel
forwards
or backwards.
Setting the SAT meter counter
The SAT meter counter can be set in the cable reel menu.
• Press
.
The numeric keypad is displayed on the monitor.
• Enter the desired value and press OK.
The SAT meter counter is set.

Envirosight DCX5000 Specifications

General

Brand	Envirosight
Model	DCX5000
Category	Controller
Language	English