Envirosight DCX5000 - Manually Activating or Disabling the Autostop Function; Modifying the Standard Autostop Position

Performing the inspection
AutoStop function
90
When reaching the AutoStop position (AutoStop meter counter = 0.0m) the crawler is automatically stopped and the following message appears
on the display:
• Press OK to close the dialog.
Manually activating or disabling the AutoStop function
• Press to activate the AutoStop function.
• Press
again to disable the AutoStop function.
Modifying the standard AutoStop position
The standard AutoStop position can be changed in the cable reel menu .
• Press
.