Envirosight DCX5000 User Manual

Performing the inspection
AutoStop function
89
• Press
to activate the AutoStop function.
When activating the AutoStop function a third meter counter (AutoStop meter counter) will be displayed on the dashboard; the current value of
the total distance meter counter minus a standard offset of 20 m will be adopted.
When driving backwards both, the AutoStop meter counter and the total distance meter counter are counting backwards. When the AutoStop
meter counter reaches the value of 0 m the crawler is automatically stopped at this position. This means that now the crawler is positioned at a
distance of 20 m from its lowering position.
4
6
5
1
20 m
2
80 m
3
100 m
1 Standard value
2 AutoStop meter counter
3 Total distance meter counter
4 Lowering position
5 AutoStop position
6 Current crawler position

Envirosight DCX5000 Specifications

General

Brand	Envirosight
Model	DCX5000
Category	Controller
Language	English