Operation of the satellite system
RAXSAT300
116
Anti-slip control function and display (Feeder unit of the RX140SATII)
NOTE!
The anti-slip control for the feeder unit is only available if a meter counter wheel is installed on the feeder unit.
The anti-slip control constantly measures the difference between the meter counter of the feeder unit and the SAT cable reel and is displayed in a
color graded bar on the status monitor (from green to orange to red).
If the color bar of the anti-slip function of the feeder unit (1) reaches the red area, the difference between the feeder unit and the SAT cable reel
is 0.5m. If this difference remains for a certain time, the system stops the crawler and also the cable reels.
The operation of the system is only released again once joystick has been released and has reached the home position.
The outer three-quarter circle (2) indicates to what extent the SAT cable real leads (deƃection from the center to the right) or lags (deƃection to
the left) the cable reel.
The inner three-quarter circle (3) indicates the current speed in 20% steps of the SAT cable reel, unwinding to the right, winding up to the left. In
the middle, the current speed is numericaly displayed in meters per minute.
To Next Page
Loading...
Need help?
General
