Performing the inspection
AntiRoll function
86
Performing the inspection
AntiRoll function
ATTENTION!
Risk of damaging the pipeline inspection system.
All the automatic functions available for the system do not absolve the operator from his duty of care. Therefore any damages caused
by negligence are the sole liability of the operator.
AntiRoll
The AntiRoll function enables the automatic monitoring and correction of the crawler's lateral inclination during pipe line inspection. This function
serves to prevent the crawler from tipping over to one side. If the limit value of 12° for crawler inclination is exceeded a warning message is
displayed and the crawler automatically stops.
NOTE!
If the crawler is operated in cruise control mode no counter steering measures are carried out. The crawler stops automatically if the
limit value for crawler inclination is exceeded.
Activating AntiRoll
The AntiRoll function can be activated in the crawler menu .
• Press
to activate the AntiRoll function.
• For adjustment of the crawler speed turn the cruise control encoder wheel on the right control panel.
To Next Page
Loading...
Need help?
General
