Chapter 7: Service and troubleshooting
196 EST3X Technical Reference Manual
Label Source Description
Dev. Maint Alert
DataCard_1
3-SSDC
3-SSDC1
3-SDDC
3-SDDC1
A detector on loop 1 is dirty
Device Maint Alert 3-AADC1 N/A
Reconstct Line
DataCard_1
3-SSDC
3-SSDC1
3-SDDC
3-SDDC1
N/A
Reconstct Line 3-AADC1 N/A
Mapping In Progress
Data Card_2
3-SSDC
3-SSDC1
3-SDDC
3-SDDC1
N/A
Mapping Disbld Data
Card_2
3-SSDC
3-SSDC1
3-SDDC
3-SDDC1
Mapping was manually disabled
Dev. Maint Alert Data
Card_2
3-SSDC
3-SSDC1
3-SDDC
3-SDDC1
A detector on loop 2 is dirty
Reconstct Line Data
Card_2
3-SSDC
3-SSDC1
3-SDDC
3-SDDC1
N/A
Table 56: Nonsupervised output pseudo points
Label Source Description
Manual Answer Control 3-MODCOM The module answers incoming calls
Table 57: Local relay pseudo points
Label Source Description
Amplifier_Backup 3-ZAxx The panel changes to the active state when
the amplifier’s input relay selects the backup
amplifier input as its signal source
Channel_1_Relay_
Confirmation
3-ZAxx The panel changes to the active state when
the amplifier’s input relay selects channel 1
Channel_2_Relay_
Confirmation
ZAxx The panel changes to the active state when
the amplifier’s input relay selects channel 2