Multimeter Tests
128 MAX-635G
Resistance
To select the parameter values:
1. Press the up/down arrow keys to highlight the desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press on a value to open a list box of options.
4. Press to confirm the value.
Resistance Thresholds
The Resistance Threshold Settings page allows you
to set the Resistance for each pair. The threshold is a
programmable value you can use as an on-screen
indicator in each test when a measured value is too
high or too low.
Type is the threshold limit for each pair: either
Maximum or Minimum.
Enabled is a flag to use the current threshold:
either Yes or No.
To set threshold values:
1. Press the up/down arrow keys to highlight the desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4. Press to confirm the value.
To Next Page
Loading...
