Factory Five Racing Type 65 Coupe - Page 314

313
www.factoryfive.com 508-291-3443

7
/
16
”,
9
/
16
”,
11
/
16
” wrench, ⅛”,
3
/
16
” hex key, marker, drill,
7
/
32
”,
7
/
16
” drill bit, hack saw, Philips head
screwdriver, ruler, Friend
 Rear glass hatch components, glass hatch.
Push the large 1.32” rubber washers onto the large button studs.
From the outside of the glass, push the Large button studs through the hinge holes in the glass hatch
Push another large 1.32” rubber washers onto the large button studs on the inside of the glass.
Put the hatch hinge arms onto the button studs so that they point forward and the arms are on the inside.
Hand tighten the jam nuts on the bottom of the studs.
Repeat for the other side.
Push the small 0.813” rubber washers on the small button studs.