Fagor QC-PDS - 4.4 Thermostats Associated with External Resistors; 4.4.1 Outside appearance; 4.4.2 Technical data

 Auxiliary modules
AUXILIARY MODULES
Thermostats Associated with External Resistors
4.
Ref.2003
· 149 ·
QC-PDS
HARDWARE
4.4 Thermostats Associated with External Resistors
4.4.1 Outside appearance
4.4.2 Technical data
All external Ballast resistors currently available in the FAGOR catalog come
with a thermostat.
They are classified as:
and their technical characteristics are:
F. H4/6
External thermostat. Outside appearance.
THERMOSTAT RESISTOR MODEL
Internal
ER+TH-18/1800, ER+TH-18/2200
ER+TH-18/1000+FAN, ER+TH-18/1500+FAN,
ER+TH-18/2000+FAN
External ER+TH-18/1100
INTERNAL THERMOSTAT
Contact N ormally C losed
Contact opening temperature 160°C (320°F) ±10%
Nominal voltage 250 V AC
Nominal current 2 A
Wire section 0.25 mm²
EXTERNAL THERMOSTAT
Protection degree IP 20
Contact
N ormally C losed
Contact opening temperature 200°C (392°F) ±10%
Nominal voltage 250 V AC
Nominal current 2.5 A
Wire section 0.25 mm²