Fagor QC-PDS - 5.4 Spindle motor-drive matching; 5.4.1 Spindle motor-single drive matching

 Selection criteria
5.
SELECTING CRITERIA
Spindle motor-drive matching
· 188 ·
198
Ref.2003
QC-PDS
HARDWARE
5.4 Spindle motor-drive matching
After selecting the asynchronous motor, check if it appears on the attached table. If so,
install the spindle motor with the indicated drive. The electrical characteristics of the
asynchronous for spindle motors are described in the manual of the corresponding motor.
Note that the highlighted drives appearing in the tables will be available soon.
5.4.1 Spindle motor-single drive matching
FM7-  -  -E01/E02 | QC-DR-  -F 
FM7-D  -S1D0-E03 | QC-DR-  -F 
T. H5/8 Matching the FM7-A  -  -E01/E02 spindle motor with the QC-DR-  -F  drive.
Rated torque Rated power Spindle drive fc
Mn (S1/S6-40%) Pn (S1/S6-40%)
Reference
N·m kW kHz
FM7-A037-
 -E01/E02 23.5/35.3 3.7/5.5 QC-DR-030-F  4/8
FM7-A055-  -E01/E02 35.0/49.0 5.5/7.7 QC-DR-030-F 
4/8
FM7-A075-  -E01/E02 47.7/71.5 7.5/11.0
QC-DR-030-F
 4
QC-DR-040-F  8
FM7-A090-
 -E01/E02 57.4/82.4 9.0/13.0
QC-DR-040-F  4
QC-DR-055-F  8
FM7-A110-
 -E01/E02 70.0/100.4 11.0/15.5
QC-DR-040-F
 4
QC-DR-055-F  8
FM7-A150-  -E01/E02 95.5/143.9 15.0/22.0
QC-DR-055-F  4
QC-DR-080-F  8
FM7-A185-  -E01/E02 117.8/165.0 18.5/26.0 QC-DR-080-F 
4/8
FM7-A220-  -E01/E02 140.0/210.0 22.0/33.0
QC-DR-120-F

4/8
FM7-B120-
 -E01/E02 114.6/176.6 12.0/18.5
QC-DR-055-F  4
QC-DR-080-F 
8
FM7-B170-
 -E01/E02 162.3/238.7 17.0/25.0
QC-DR-080-F 
4
QC-DR-120-F

8
FM7-A300-
 -E01 191.0/286.0 30.0/45.0
QC-DR-120-F 
4
QC-DR-160-F 
8
FM7-B220-
 -E01 210.0/315.1 22.0/33.0 QC-DR-120-F  4/8
FM7-A370-  -E01 235.0/356.0 37.0/56.0
QC-DR-160-F 
4
QC-DR-225-F 
8
FM7-B280-
 -E01 267.4/401.1 28.0/42.0
QC-DR-120-F 
4
QC-DR-160-F 
8
FM7-A510-
 -E01/E02 325.0/452.0 51.0/71.0
QC-DR-160-F 
4
QC-DR-225-F 
8
FM7-C215-
 -E01/E02 410.6/553.9 21.5/29.0
QC-DR-120-F 
4
QC-DR-160-F 
8
FM7-C270-
 -E01/E02 515.7/706.6 27.0/37.0
QC-DR-160-F 
4
QC-DR-225-F 
8
T. H5/9 Matching the FM7-D  -S1D0-E03 spindle motor with the QC-DR-  -F  drive.
Rated torque Rated power Spindle drive fc
Mn (S1/S6-40%) N·m Pn (S1/S6-40%) kW
Reference
kHz
Winding connection




FM7-D055-S1D0-E03 35.0/49.0 13.1/23.8 5.5/7.7 5.5/10.0
QC-DR-030-F

4
QC-DR-040-F

8
FM7-D075-S1D0-E03 47.7/70.0 17.9/31.0 7.5/11.0 7.5/13.0
QC-DR-040-F

4
QC-DR-055-F

8
FM7-D110-S1D0-E03 70.0/98.7 26.3/47.7 11.0/15.5 11.0/20.0
QC-DR-055-F

4
QC-DR-080-F

8
FM7-D150-S1D0-E03 95.5/140.0 35.8/62.0 15.0/22.0 15.0/26.0
QC-DR-080-F

4
QC-DR-120-F  *
8
FM7-D185-S1D0-E03 117.8/165.5 44.2/76.4 18.5/26.0 18.5/32.0
QC-DR-080-F

4
QC-DR-120-F 
8
FM7-D220-S1D0-E03 140.0/210.0 52.5/95.5 22.0/33.0 22.0/40.0
QC-DR-120-F

4/8
* install the QC-DR-080-F  drive using a delta (triangle) winding connection.