Fagor QC-PDS - 12.1 Synchronous Servomotors

 Commercial models
12.
COMMERCIAL MODELS
Synchronous Servomotors
366
Ref.2003
QC-PDS
HARDWARE
· 356 ·
12.1 Synchronous Servomotors
F. H12/1
Synchronous FKM servomotors. Name.
0
Standard
1
Electro-ventilated
8
Low inertia
9
Low inertia and electro-ventilated ·future·
20 45 2000 rev/min 4500 rev/min
30 50 3000 rev/min 5000 rev/min
FKM . .
MOTOR SERIES
SIZE 1, 2, 4, 6, 8, 9
LENGTH 1, 2, 3, 4, 5, 6
RATED
SPEED
WINDING
A
400 V AC
MOTOR FEEDBACK DEVICE
A3
A4 Multi-turn absolute sinusoidal 1Vpp encoder ·128 ppt·
E3 Sinusoidal 1Vpp encoder ·1024 ppt· taper shaft
E4 Sinusoidal 1Vpp encoder ·128 ppt·
I0 Incremental TTL encoder ·2500 ppt·
FLANGE
AND SHAFT
0
HOLDING
BRAKE
OPTION
0 Without brake
1
With standard brake · 24 V DC ·
2 With extra brake · 24 V DC ·
FAN AND
INERTIA
OPTION
1
Cylindrical ·with no keyway·
40 60 4000 rev/min 6000 rev/min
01 ... 99
SPECIFICATION
Only when it has a special configuration ·K·
2 Shaft with keyway and seal
3 Keyless shaft with seal
9 Special configuration
- K
.
.
Standard
2 Optimized for ACSD-16H
3
Small size
WINDING
OPTION
PTC KTY84
1
Pt1000 RTD
2
PTC 111
TEMPERATURE
SENSOR
EXTRAS
None
K Special configuration
U
NRTL Certification
With keyway ·half-key balancing·
- 1/
- 0/
Multi-turn absolute sinusoidal 1Vpp encoder·1024 ppt· taper shaft
Note.
Encoders with references:
-
I0 , only available for the FKM2/4/6 series.
- E3/A3 , only available for the FKM2/4/6/8/9series.
- E4/A4 , only available for the FKM1 series.