Fagor QC-PDS - 2.2 Regenerative Power Supplies; 2.2.1 Outside appearance

 Power supplies
POWER SUPPLIES
Regenerative Power Supplies
2.
Ref.2003
· 53 ·
QC-PDS
HARDWARE
2.2 Regenerative Power Supplies
2.2.1 Outside appearance
SIZE |3
QC-RPS-030-F 
Refer to the diagram for an overall view of the outside of the unit.
F. H2 /9
Regenerative power supplies | size|3. QC-RPS-030-F  . Outside appearance.
X12.
B-/B+/-/+
- KM1 external
contactor control
Characteristics
plate
Version/model
label
M6x18 screw to connect
the protective conductor
PE
PE : P rotective E arth.
Tightening torque: 5 N·m
A19/X11
U1/U-V1/V-W1/W
three-phase power input to the
main power supply
A18. +24 V DC input
A17. (+/-) DC BUS pins
Under cover:
Access lid for DC BUS with bottom
pivot hinge.
Opening and closing click tool.
E21B/E21A.
Direct feedback.
Only for
· QC-RPS-  -FF2 · models
X60.
T1/T2/T3
Line voltage
feedback
B10B/B10A.
SERCOS-III
interface
Status leds:
D10/D11.
SERCOS-III
communication
D8/D9.
Power supply
Access lid for DC BUS with bottom pivot
hinge. Opening and closing click tool
A17 A17
A18
A18
A17. (+/-) DC BUS pins
Under cover: