Installation
INSTALLATION
Connection of the control and communications signals
8.
Ref.2003
· 295 ·
QC-PDS
HARDWARE
8.6.7 SERCOS-III connections inside the FAGOR QUERCUS CNC cabinet
The SERCOS-III connection between the QC-DR-X-FX drive (B10B/B10A
connectors) or the QC-RPS-X-FX power supply (B10B/B10A connectors)
to the in-cabinet FAGOR QUERCUS CNC central unit is made via the
B10 connector found on the front of the QUERCUS CNC. See figure.
For more information, refer to the manuals of the FAGOR QUERCUS
CNC.
F. H8/45
B10 connector. SERCOS-III connector for the in-cabinet FAGOR
Q
UER
C
US
CNC
.
To Next Page
Loading...